Rover C4 a new generation in 3D metal detectors and ground scanners, with enhanced technology from OKM-Germany a leader company in field of 3D imaging metal detectors
Rover C4 is a best new 3D imaging technology to find golden treasures
also a precious metals underground with accurate results and great detection performance.
Rover C4 gold detector use a special probes to perform detailed 3D scan of underground
then the scanned data can be viewed on any computer with installed 3D software
so it get easy analysis of buried targets and knowing all details
such as the size and depth of target visually.
Rover C4 is a perfect choice for treasure a hunter who is looking for buried treasures
for example chests, boxes, golden artifacts and statues
and silver coins, rings and jewelry.
Rover C4 is a perfect gold detector device that used
for underground cavities detection
such as caves, tunnels, chambers, bores and graves.
Rover C4 has a simple user interface the can be operated either
via touch screen or hardware buttons available in control unit,
also the device is equipped with new innovative LED orbit that emit
a light with different color to indicates underground targets visually.
Rover C4 Features
– Device Applications
Rover C4 incorporates a best German 3D ground scanning methods.
therefore it can find and detect most types of buried underground objects
such as following targets:
- Buried golden objects , such as gold treasures, golden chests, and ancient coins and so on.
- Non-Ferrous metals. such as silver, bronze and copper.
- Natural Gold including gold nuggets and gold veins.
- Voids and cavities like tunnels, chambers, dugouts, bunkers
– Measurement Probes:
Rovers C4 are bundled with two measuring probes.
so it can be used for different applications.
also it is suitable for certain operating modes.
Both measuring probes are equipped with a light sphere called “LED Orbit”,
that can indicate the measured values by color changes
of the small colored LED during the scanning process.
– Operating Modes:
Rover C4 gold & metal detector has four search modes.
that can be used for different detection applications and tasks:
1 – Ground Scan Mode:
The “Ground Scan” operating mode allows a detailed 3Dd graphical measurement
of any area for later analysis on a computer.
then to perform the measurement you can either use the Standard Probe or the Super Sensor
2 – Mineral Scan Mode:
This mode is used for prospecting for mineral deposits or other naturally occurring minerals
or formations located in the ground, it is important to work in a clean environment, free of debris.
3 – Magnetometer Mode
In operating mode “Magnetometer” you can research the area in regard to ferromagnetic metals.
Primarily this function is an acoustical mode;
so it only generates a very rough graphical representation
on the display to visualize the highs and lows
You can use the Standard Probe as well as the Super Sensor
for this operating mode.
By using the high resolution Super Sensor you can obtain
a much deeper penetration depth.
4 – Pin Pointer Mode
As the name “Pin Pointer” already indicates,
it allows you to pinpoint potential targets more precisely.
Furthermore you have the possibility to distinguish between ferromagnetic
and non-ferromagnetic metals.
However this operating mode can only be used with the Super Sensor.
You cannot use the Standard Probe.
– 3D Data Analysis via Visualizer 3D software
The data that probes collect by performing scan
using standard probe and super sensor in ground scan mode
or mineral scan mode may be transfer to any computer or laptop
with installed Visualizer 3D software.
so a user can make detailed three-dimensional analysis of buried targets underground.
As a result Visualizer 3D software program let the user see the 3D graphical
re-presentation of buried underground objects visually
with different color that belong to every object type,
for example he can know that specific object is precious metal
such as gold or silver by its reddish color.
It is easy to know all details about the buried targets
such its exact position and depth or approximate shape
just by using controls in 3D software.
– Touch Screen
The touch screen is a unique feature of Rover C4 that make easy to operate
the device in search fields and adjusting its settings also, such as scan modes and other settings,
with easy to learn multilingual graphical user interface with simple menu system.
Garry Newman –
Professional ground scanner for serious treasure hunters
Beautiful design, powerful ground scan system
Expensive