Gold Racer the most sensitive gold detection device to find gold and metals underground, with latest technology and best performance– Get your device now at best price from Orient Technology Group
Gold Racer offers advanced gold prospecting capabilities.
Operating at 56 kHz frequency, so it can detect the tiniest nuggets
while ignoring harsh ground conditions and hot rocks in gold fields around the world.
Gold Racer is a versatile device for many metal detection activities
as it can be used to detect gold nuggets, coins, jewelry and other metals.
Gold Racer Features
– 3 Search Modes
1 – All Metal Mode:
It is the deepest mode of the device,different than the discrimination modes,
so this mode features a threshold tone which is continuously heard in the background.
The device does not discriminate targets while in the All Metal mode
and detects all targets (metal, mineralized rocks etc.).
ID of the detected target is shown on the display (except for negative hot rocks)
then the same warning tone is provided for all targets.
The warning tone increases in pitch as the target is approached.
2 – Discrimination Mode -1 (DISC.1):
It is the 2-tone discrimination mode designed for tough gold fields
with high mineralization or positive hot rocks.
so It offers slightly less depth but faster target detection
also a recovery speed in highly mineralized soils compared
to the other modes
3 – Discrimination Mode -2(DISC.2):
It is the 2- tone discrimination mode designed for cleaner gold fields
with milder mineralization.
so It provides more depth compared to the DISC.1 mode.
-Digital Target ID & ID Filtering
Target ID is the number produced by the metal detector based on the conductivity of the metals
so it gives an idea to the user about what the target may be.
Target ID is shown with two digits on the display and ranges between 01-99.
ID Filter is the ability of the device to ignore unwanted metals.
In other words, the detector will not provide a warning tone or a target ID
when such metals are detected.
Hence It provides ease of use by rejecting mineralized rocks (hot rocks)
and metals such as iron and foil.
– Ground Balance Options
Gold Racer has three ground balance options as follows:
1 – Manual Ground Balance:
Allows you to manually modify the ground balance value,
so It is not preferred mostly because it takes time.
However, it is the preferred option in cases where successful grounds balance
cannot be performed using other methods or minor corrections are required
to the automatic balance.
2 – Automatic Ground Balance:
Gold Racer is designed to allow for automatic ground balancing
conveniently on any type of ground.
Therefore, it is recommended to perform automatic ground
balance upon start up.
3 – Ground Tracking:
Tracking is suitable for use in areas where different soil structures are present
within the same land, steep and broken fields or in fields ,
where mineral rocks are scattered widely apart.
– Frequency Shift
It is the setting which enables to change the operating frequency of the device.
so It is used to eliminate the electromagnetic signals that the device receives from
another detector which operates in the same frequency range nearby or from the surroundings.
If too much noise when the search coil in the air receive,
this is because by the surrounding electromagnetic signals or too much sensitivity.
– LED Flashlight
Use the LED flash light for lighting the scanned area while performing search
at night or dark locations.
But LED flashlight does not operate when the device is off.
so we recommend to turn it on when necessary since its
operation consumes battery charge.
– Other Features
- Operating at 56 kHz frequency
- iSAT (Intelligent Self-Adjusting Threshold).
- Tone Break.
- Audio Boost.
- Superior discrimination ability.
- Pinpoint and Depth indicator.
- Professional Design and super quality.
- Waterproof search coil.
- Optional Wireless 2.4 GHZ Headphones.